Tektronix TDS7000 Series Programmer's Manual page 25

ACQuire:NUMAVg
Description
This command sets or queries the number of waveform acquisitions that make up an averaged
waveform. Use the ACQuire:MODe command to enable the Average mode. Sending this command is
equivalent to selecting Horizontal/Acquisition Setup from the Horiz/Acq menu, selecting the Acquisition
tab, and then choosing Average from the Acquisition Mode group box. Then enter the desired number of
waveforms that will be used to make up an averaged waveform in the # of Wfms box.
Group
Acquisition
Related Commands
ACQuire:MODe (see page 20)
Syntax 1
ACQuire:NUMAVg <NRf>
Syntax 2
ACQuire:NUMAVg?
Arguments
• NRf
This is the number of waveform acquisitions to average.
Example 1
ACQuire:NUMAVg 10
This command specifies that 10 waveform averages will be performed before exponential averaging
starts.
Example 2
ACQuire:NUMAVg?
This command might return
averaging.
, indicating that there are 75 acquisitions specified for
:ACQUIRE:NUMAVG 75
23