Tektronix TDS7000 Series Programmer's Manual page 486

WFMInpre:PT_Off
Description
This command specifies or returns the trigger point, within the waveform record, for the reference
waveform specified by the DATa:DESTination command.
Group
Waveform Transfer
Related Commands
DATa:DESTination (see page 469), DATa:STARt (see page 473), WFMOutpre:PT_Off (see page 501)
Syntax 1
WFMInpre:PT_Off <NR1>
Syntax 2
WFMInpre:PT_Off?
Argument
• <NR1>
This is (record length -1) to record length and is the position of the data point immediately following the
actual trigger. <NR1> is expressed relative to DATa:STARt.
Example 1
WFMInpre:PT_Off 0
This command specifies that the trigger point is the first point in the waveform record, which is the
default.
Example 2
WFMInpre:PT_Off?
This query might return
:WFMINPRE:PT_OFF 0
484
, indicating the incoming waveform trigger point.