Test Results - Tektronix TDS7000 Series Programmer's Manual

TEST:RESults?
Description
This query-only command returns an abbreviated status about the results of the last TEST execution.
This command is equivalent to selecting Instrument Diagnostics from the Utilities menu and then
reviewing the Diagnostic Status.
Group
Diagnostics
Related Commands
TEST (see page 102), TEST:RESults:VERBose? (see page 104)
Syntax
TEST:RESults?
Example 1
TEST:RESults?
This query might return :TEST:RESULTS "135", indicating the specific failure code of the first test
failure.
Example 2
TEST:RESults?
This query might return :TEST:RESULTS "PASS", indicating that the previously executed test passed.
Example 3
TEST:RESults?
This query might return :TEST:RESULTS "*****", indicating that the test was not run.
103