Tektronix TDS7000 Series Programmer's Manual page 18

Block
Several instrument commands use a block argument form (see the following table).
B l o c k A r g u m e n t s
Symbol Meaning
<NZDig> A nonzero digit character in the range of 1–9
<Dig> A digit character, in the range of 0–9
<DChar> A character with the hexadecimal equivalent of 00
through FF (0 through 255 decimal)
<Block> A block of data bytes defined as:
<Block> ::=
{#<NZDig><Dig>[<Dig>...][<DChar>...]
|#0[<DChar>...]<terminator>}
<NZDig> specifies the number of <Dig> elements that follow. Taken together, the <Dig> elements form a
decimal integer that specifies how many <DChar> elements follow.
16