Tektronix TDS7000 Series Programmer's Manual page 162

HIStogram:STATE
Description
This command sets or queries whether the histogram calculations are enabled. This is equivalent to
selecting Waveform Histograms from the Measure menu.
Group
HIStogram
Related Commands
HIStogram:MODe (see page 157), MEASUrement:METHod (see page 258)
Syntax 1
HIStogram:STATE {ON|OFF|NR1}
Syntax 2
HIStogram:STATE?
Arguments
• <ON>
This enables histogram calculations.
• <OFF>
This disables the histogram calculations.
• <NR1>
A 0 disables histogram calculations; any other value enables histogram calculations.
Example 1
HIStogram:STATE ON
This command enables histogram calculations.
Example 2
HIStogram:STATE?
This query might return :HISTOGRAM:STATE 0, indicating that histogram calculations are currently
disabled.
160