Tektronix TDS7000 Series Programmer's Manual page 462

Gpib programmer online guide digital phosphor oscilloscopes

Hide thumbs Also See for TDS7000 Series:

Table of Contents

SELect:<wfm>

This command turns on a specified waveform. This action also resets the acquisition. The query returns

whether the channel is on or off but does not indicate whether it is the selected waveform.

SELect:<wfm> {ON|OFF|<NR1>}

SELect:<wfm>?

This turns on the display of the specified waveform. This waveform also becomes the selected

This turns off the display of the specified waveform.

A 0 turns off the display of the specified waveform; any other value turns on the display of the specified

SELect:CH2 ON

This command turns the channel 2 display on and selects channel 2.

SELect:REF1?

This query might return

:SELECT:REF1

, indicating that REF1 is the selected waveform.

Need help?

Do you have a question about the TDS7000 Series and is the answer not in the manual?