Tektronix TDS7000 Series Programmer's Manual page 247

MEASUrement:MEAS<x>?
Description
This query-only command returns all measurement parameters for the displayed measurement specified
by x, which can range from 1 through 8. This query command is equivalent to selecting Measurement
Setup from the Measure menu and viewing the Measurements table; then choosing the Time tab, clicking
the Delay button and viewing the Delay Edge and Search Direction settings.
Group
Measurement
Syntax
MEASUrement:MEAS<x>?
Example
MEASUrement:MEAS3?
This query might return
:MEASUREMENT:MEAS3:STATE 0;TYPE PERIOD;UNITS "s";SOURCE1
CH1;DELAY:EDGE1 RISE;EDGE2 RISE;DIRECTION FORWARDS
245