Required Driver Parameters; Emulex Oem Fibre Channel Card Setup - Fujitsu ETERNUS DX Configuration Manual
Fibre channel for oracle solaris driver settings for non-fujitsu fibre channel cards
Hide thumbs
Also See for ETERNUS DX:
- Configuration manual (44 pages) ,
- User manual (42 pages) ,
- Configuration manual (28 pages)
Table of Contents
Advertisement
Chapter 1
Operations When Using Oracle Fibre Channel Cards
1.5
Required Driver Parameters
4
Use the following command to confirm that the storage system and all the logical units have been cor-
rectly recognized.
# format
# format
Searching for disks...done
c4t16d0: configured with capacity of 7.98GB
c4t16d1: configured with capacity of 7.98GB
c5t16d0: configured with capacity of 7.98GB
c5t16d1: configured with capacity of 7.98GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf6851ce,0
1. c4t210000E000A8FFAFd0 <FUJITSU-ETERNUS_DX8000 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/SUNW,qlc@1/fp@0,0/ssd@w210000e000a8ffaf,0
2. c4t210000E000A8FFAFd1 <FUJITSU-ETERNUS_DX8000 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/SUNW,qlc@1/fp@0,0/ssd@w210000e000a8ffaf,1
3. c5t250000E000A8FFAFd0 <FUJITSU-ETERNUS_DX8000 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w250000e000a8ffaf,0
4. c5t250000E000A8FFAFd1 <FUJITSU-ETERNUS_DX8000 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w250000e000a8ffaf,1
Specify disk (enter its number):
The underlined portion indicates that the target ID=250000E000A8FFAF, lun=0 and 1 are connected
and that c5t250000E000A8FFAFd0 and c5t250000E000A8FFAFd1 are assigned to each of these LUNs.
1.5
Required Driver Parameters
1.5.1
Emulex OEM Fibre Channel Card Setup
If an Oracle driver for an Emulex OEM Fibre Channel card is used, the parameters of the "emlxs.conf" configu-
ration file needs to be edited using the "vi" command. Edit the file in accordance with the
"1.5.2 emlxs.conf Parameter List" (page
Solaris 11 OS
•
If the "/etc/driver/drv/emlxs.conf" file does not exist, copy the "/kernel/drv/emlxs.conf" file to the "/etc/driv-
er/drv" directory and edit the newly copied "emlxs.conf" file.
If the "/etc/driver/drv/emlxs.conf" file exists, do not copy over the file but instead edit the existing
"emlxs.conf" file.
Solaris 10 OS
•
Edit the "/kernel/drv/emlxs.conf" file.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
22).
20
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0
Advertisement
Table of Contents
