Chapter 4
Operations When Using Brocade Fibre Channel
Cards
This chapter describes the procedures for "Installing the Driver and Setting Up the Server" and "Recognizing
the Logical Units" required to establish a connection between a server with Brocade Fibre Channel cards and
an ETERNUS DX/AF.
4.1
Workflow
Workflow
Installing the Fibre Channel Card Driver
Install the driver. Download the proper driver from the Brocade web-site as required.
"4.2 Installing the Fibre Channel Card Driver" (page 74)
•
Used for driver installation
•
-
Driver (downloaded from the Brocade web-site)
Creating Various Management Tables
Enter the necessary information in the "WWN Instance Management Table for the Server", "WWN In-
stance Management Table for Storage System", and "Target Binding Table".
"4.3 Setting Up the Server" (page 74)
•
"Appendix A Various Management Table Templates" (page 82)
•
Editing the Configuration File
Set the driver parameters by editing the configuration file.
"4.3 Setting Up the Server" (page 74)
•
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
73
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0