Setting The Configuration File; Re-Checking The Settings - Fujitsu ETERNUS DX Configuration Manual

Chapter 2 Setup Procedure for Emulex Fibre Channel Cards
2.3 Setting Up the Server
3
Based on the connection path(s) confirmed in
agement table for the server", enter the instance names corresponding to the physical slot names on
the server into the "target binding table".
1. From the two tables,
find the same
combination of
physical slot name
and Channel
Adapter as listed in
the path route table.
This completes the target binding table.
2.3.4

Setting the Configuration File

Edit the configuration file according to the "WWN instance management table for the server", "WWN instance
management table for storage system", and "target binding table". For how to set to the configuration file
and the setting example, refer to
Driver Versions Before V6.30g" (page
Check the WWN instance management table for the server, WWN instance management table for storage
system, and target binding table for any omissions.
2.3.5

Re-checking the Settings

After the settings are complete, re-check the configuration file for any incorrect settings.
Check the target binding values before rebooting the server. If the server boots with a setting error, it may
recognize a different storage system from that set in the system configuration, without generating a con-
nection error.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
[WWN instance management table for the server]
Physical slot name
SERV1_SLOT0 10000000c9366046
SERV1_SLOT1 10000000c9365d9e
[target binding table]
Channel Adapter name SCSI T_ID
CM0CA0Port0 16
CM1CA0Port0 16
"2.5.1 For Driver Versions V6.30g and Later" (page 41)
47).
Copyright 2017 FUJITSU LIMITED
Step 2 and the information in the "WWN instance man-
WWN Instance name
lpfc0
lpfc1
RAID-WWN
202000c000cb0001
203000c000cb0001
35
2. Record the
instance name
in the same row
as the physical
slot name in the
target binding table.
Instance name
lpfc0
lpfc1
and "2.5.2 For
P3AM-6312-18ENZ0