Fujitsu ETERNUS DX Configuration Manual page 38

Chapter 2 Setup Procedure for Emulex Fibre Channel Cards
2.4 Setting Up the Server to Recognize the Logical Units
Example:
#
# Copyright (c) 1992, by Sun Microsystems, Inc.
#
#ident "@(#)sd.conf
name="sd" class="scsi" class_prop="atapi"
target=0 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=1 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=2 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=3 lun=0;
name="sd" class="scsi"
target=4 lun=0;
name="sd" parent="lpfc" target=16 lun=0;
name="sd" parent="lpfc" target=16 lun=1;
# End lpfc auto-generated configuration -- do NOT alter or delete this line
• Use the "lun=" format to list all the LUNs that are to be connected.
For "target=", specify the target ID of the "fcp-bind-WWPN" parameter described in the configuration file in
•
"2.5.2 For Driver Versions Before V6.30g" (page
The ETERNUS Web GUI or ETERNUSmgr Loop-ID is natively set as a hexadecimal value, which must be
converted to a decimal value for this setting.
2.4.1.2 Getting the Server to Recognize the Logical Units
The server now needs to use the new sd driver settings to recognize the logical units.
1
Reconfigure and reboot the server to get it to recognize the listed logical units. Execute the following
command.
# touch /reconfigure
# /usr/sbin/shutdown -y -g0 -i6
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
1.9 98/01/11 SMI"
47).
38
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0