Creating A Wwn Instance Management Table For Storage System - Fujitsu ETERNUS DX Configuration Manual

Chapter 3 Setup Procedure for QLogic Fibre Channel Cards
3.3 Setting Up the Server
(6)
Enter "4" to select "4: Return to Previous Menu".
The Main Menu reappears.
10: Driver Settings
11: HBA Utilities
12: Flash Beacon
13: Diagnostics
14: Statistics
15: Help
16: Quit
(7)
Enter "16" to quit.
Enter choice => 0
#
4
Add the results in the "WWN instance management table for the server".
Example:
Physical slot name
3.3.2

Creating a WWN Instance Management Table for Storage System

Create a "WWN instance management table for storage system" that summarizes information relating to CA
in the ETERNUS DX/AF storage systems.
When there are two ports on the ETERNUS DX/AF storage systems:
Channel Adapter
CM0CA0Port0
CM1CA0Port0
Check the following items and enter them in the WWN instance management table for storage system.
Channel Adapter
•
CA name in the ETERNUS DX/AF storage systems
• WWN
The WWN for each CA in the ETERNUS DX/AF (check using ETERNUS Web GUI or ETERNUSmgr)
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Main Menu
1: Display System Information
2: Display HBA Settings
3: Display HBA Information
4: Display Device List
5: Display LUN List
6: Configure HBA Settings
7: Target Persistent Binding
8: Selective LUNs
9: Boot Device Settings
WWN
21-00-00-E0-8B-91-D9-4F
21-01-00-E0-8B-91-D9-4F
WWN
202000e000cb0001
203000e000cb0001
Copyright 2017 FUJITSU LIMITED
Instance name
hba0
hba1
60
Physical path name
/pci@b,2000/QLGC,qla@2
/pci@b,2000/QLGC,qla@2,1
T_ID
16
16
P3AM-6312-18ENZ0