Fujitsu ETERNUS DX Configuration Manual page 15

Chapter 1 Operations When Using Oracle Fibre Channel Cards
1.3 Setting Up the Server
4
Check the WWN of each Fibre Channel card.
(1)
Execute the following command to check the WWN that corresponds to the Fibre Channel card in-
stance name.
# prtpicl -v -c scsi-fcp | grep devfs-path
Example:
# prtpicl -v -c scsi-fcp | grep devfs-path
(2)
Use the following command to check the WWN of the Fibre Channel card that corresponds to the
physical path name.
# cat /var/adm/messages | grep emlxs0
Example:
# cat /var/adm/messages | grep emlxs0
Sep 12 09:46:50 sfv890b emlxs: [ID 349649 kern.info] [B.125B]emlxs0: NOTICE: 100: Driver attach.
(WWPN:10000000C94CDC42 WWNN:20000000C94CDC42)
# cat /var/adm/messages | grep emlxs1
Sep 12 09:47:15 sfv890b emlxs: [ID 349649 kern.info] [B.125B]emlxs1: NOTICE: 100: Driver attach.
(WWPN:10000000C94CDC43 WWNN:20000000C94CDC43)
5
Add the results in the "WWN instance management table for the server".
Example:
Physical slot
name
6
Check the controller number of the target connected to the Fibre Channel card.
Use the following command to check the controller number of the target connected to the Fibre Chan-
nel card.
# cfgadm -v
Example:
# cfgadm -v
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
c4 connected unconfigured unknown
unavailable fc-fabric n /devices/pci@9,600000/SUNW,emlxs@1/fp@0,0:fc
c5 connected unconfigured unknown
unavailable fc-fabric n /devices/pci@9,600000/SUNW,emlxs@1,1/fp@0,0:fC
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
:devfs-path /pci@9,600000/SUNW,emlxs@1
:devfs-path /pci@9,600000/SUNW,emlxs@1,1
:devfs-path /pci@9,600000/SUNW,emlxs@2
:devfs-path /pci@9,600000/SUNW,emlxs@2,1
WWN
10000000C94CDC42
10000000C94CDC43
Copyright 2017 FUJITSU LIMITED
Controller num-
Instance name
ber
emlxs0
emlxs1
15
Physical path name
/pci@9,600000/SUNW,emlxs@1
/pci@9,600000/SUNW,emlxs@1,1
P3AM-6312-18ENZ0