Fujitsu ETERNUS DX Configuration Manual page 79

Chapter 4 Operations When Using Brocade Fibre Channel Cards
4.3 Setting Up the Server
3
Set the topology to "p2p".
# bcu port --topology 1/0 p2p
Setting will be enforced after port --disable and --enable
4
Set the frame data size to "2048".
# bcu port --dfsize 1/0 2048
Setting will be enforced after port --disable and -enable
5
Execute the "port disable|enable" command to apply the port speed, topology, and frame data size set-
tings.
# bcu port --disable 1/0
port disabled
# bcu port --enable 1/0
port enabled
6
Check the port speed, topology, and frame data size that have been set.
Port speed confirmation
•
# bcu port --speed 1/0
Current port speed is:
Configured port speed is:
Topology confirmation
•
# bcu port --topology 1/0
Current topology is:
Configured topology is:
Frame data size confirmation
•
# bcu port --dfsize 1/0
Port maximum receive data field size is 2048 -
To set multiple ports, repeat the above procedure for each port.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
8G
8G
P2P
P2P
79
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0