Creating A Target Binding Table - Fujitsu ETERNUS DX Configuration Manual

Fibre channel for oracle solaris driver settings for non-fujitsu fibre channel cards
Hide thumbs Also See for ETERNUS DX:
Table of Contents

Advertisement

Chapter 3
Setup Procedure for QLogic Fibre Channel Cards
3.3
Setting Up the Server
T_ID
The SCSI target ID (decimal value) that is to be defined for each CA (check using ETERNUS Web GUI or ETER-
NUSmgr)
For switch connections, the SCSI target ID is irrelevant to the physical protocol, however it must be defined
as a Solaris OS SCSI driver setting. Values matched to the server environment and connection state of the
devices must be set beforehand.
It is recommended to set the same target ID to CAs that configures a multipath.
3.3.3

Creating a Target Binding Table

This procedure is not necessary for direct connections.
Target binding logically binds the Fibre Channel card installed in the server, and the CA on the ETERNUS
DX/AF storage systems to be connected to the server.
Target binding binds the instance name of the Fibre Channel card, channel adapter name, WWN, and target
ID.
Enter the required information for target binding in the "target binding table". Create "Target binding tables"
for each server to be connected.
Enter the following information in the target binding table.
Name of target server
Channel Adapter names and their SCSI target IDs
The "channel adapter names" and "target IDs" entered in the "WWN instance management table for stor-
age system"
RAID-WWN
The WWN entered in the "WWN instance management table for storage system"
1
Enter the target information to be set for the server.
Reflect the information from the "WWN instance management table for storage system" in the "target
binding table".
Example:
Channel Adapter name
CM0CA0Port0
CM1CA0Port0
2
Confirm the connection path(s) in the system.
Example:
Fibre Channel Switch A
CA0 Port0
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
WWN
202000e000cb0001
203000e000cb0001
Server#0
Slot0
Slot1
Fibre Channel Switch B
CA0 Port1
CA0 Port0
CA0 Port1
CM0
CM1
ETERNUS DX/AF
Copyright 2017 FUJITSU LIMITED
T_ID
16
16
61
Instance name
P3AM-6312-18ENZ0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus af

Table of Contents