Color Balance; Display Timeout; Display Orientation; Fans - Chauvet DJ Intimidator Wash Zoom 450 IRC User Manual

Hide thumbs Also See for Intimidator Wash Zoom 450 IRC:
Table of Contents

Advertisement

Color Balance

Display Timeout

Display
Orientation

Fans

Reset

Load Factory
Defaults

System Info

Intimidator Wash Zoom 450 IRC User Manual Rev. 2
To set the color balance, do the following:
Press <MENU>.
1.
2.
Use <UP> or <DOWN> to choose Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Color Balance.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select RED, GREEN, BLUE, or WHITE.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to increase or decrease the color value (100–255).
9.
Press <ENTER>.
10. Repeat steps 6-9 until the desired color balance is set.
To select whether the display backlight should turn off after inactivity, follow the
instructions below:
Press <MENU>.
1.
2.
Use <UP> or <DOWN> to choose Setup.
Press <ENTER>.
3.
4.
Use <UP> or <DOWN> to select Display.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select ON or OFF.
7.
Press <ENTER>.
To set the display orientation on the Intimidator Wash Zoom 450 IRC, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to choose Setup.
Press <ENTER>.
3.
4.
Use <UP> or <DOWN> to select Screen Rev.
Press <ENTER>.
5.
6.
Use <UP> or <DOWN> to select ON or OFF.
Press <ENTER>.
7.
To set the fan speed, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to choose Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Fans.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select Auto or Full.
7.
Press <ENTER>.
To restart the Intimidator Wash Zoom 450 IRC, do the following:
1.
Press <MENU>.
Use <UP> or <DOWN> to choose Setup.
2.
3.
Press <ENTER>.
Use <UP> or <DOWN> to select Reset.
4.
5.
Press <ENTER>.
To reset the Intimidator Wash Zoom 450 IRC to factory default settings, follow the
instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to choose Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Factory Set.
5.
Press <ENTER>.
To view system information, do the following:
1.
Press <MENU>.
Use <UP> or <DOWN> to choose Sys Info.
2.
3.
Press <ENTER>. The version number, running mode, DMX address, and current
product temperature will show on the display.
Page 21 of 27

Advertisement

Table of Contents
loading

Table of Contents