Table of Contents
Advertisement
Operation
Save Configuration
To set the name for the current device configuration:
1. Press <MENU> repeatedly until Save Configuration shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Name.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select _ _ _ _ _ _ _ _ _ _ _ (to select a name), Cancel to (return to
previous menu), or Enter (to save once a name has been selected).
6. Press <ENTER>.
To save the current configuration:
1. Press <MENU> repeatedly until Save Configuration shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Backup Data.
4. Press <ENTER>.
5. Press Return upon successful backup.
Load Configuration
To select and load a configuration.
1. Press <MENU> repeatedly until Load Configuration shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired configuration.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select Restore or Del.
6. Press <ENTER>.
Default Setting
To restore all settings on the DMX-RT4 tool their original default settings:
1. Press <MENU> repeatedly until Default Setting shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Yes (Restores all default settings) or No (to cancel).
4. Press <ENTER>.
DMX-RT4 User Manual Rev. 1
18
Advertisement
Table of Contents
