Table of Contents
Advertisement
Installation
4.1
Safety notes for installation
Mechanical impact effect
Protect the 6DR5**0-*G***-**** version of the positioner from mechanical impact effects that
are greater than 1 Joule; this ensure adherence to the IP66 degree of protection.
When installing, observe the following sequence imperatively to avoid injuries or
mechanical damage to the positioner/mounting kit:
1. Mount the positioner mechanically.
2. Connect the electrical auxiliary power supply.
3. Connect the pneumatic auxiliary power supply.
4. Commission the positioner.
Assembling the components
When assembling components, ensure that only those positioners and optional modules
are combined with each other that are approved for the corresponding operating range.
This condition is particularly applicable for the safe operation of the positioner in the areas
of zones 1, 2 and 22, where the atmosphere may be potentially explosive. Observe the
device categories 2 and 3 of the device itself and its optional modules imperatively.
SIPART PS2 with PROFIBUS communication
Operating Instructions, 09/2007, A5E00127926-07
WARNING
WARNING
4
37
Advertisement
Table of Contents
