Installing the optional modules
5.1 General information about the installation of option modules
5.1.2
Installing optional modules in the standard and intrinsically safe version
The following optional modules are available for the positioner in the standard and
intrinsically safe version:
● I
● Alarm unit
● SIA unit
● Mechanical limit switch module
● EMC filter module
Preparations for installation
Proceed as follows for the preparations for installation:
1. Open the positioner.
2. Unlatch the four fixing screws of the enclosure cover using a Phillips screwdriver.
3. Disconnect the power supply lines or de-energize them.
4. Remove the module cover.
5. Unlatch both the screws using a screwdriver.
56
module
y
SIPART PS2 with PROFIBUS communication
Operating Instructions, 09/2007, A5E00127926-07