Table of Contents
Advertisement
3.4.5
Purge air switching
Note
Equipment
Versions with flameproof enclosures are not equipped with purge air switching.
When the enclosure is open, the purge air switch above the pneumatic terminal strip on the
pneumatic block can be accessed.
● In the IN position, the enclosure is flushed from inside with a small volume of clean and
● In the OUT position, the purge air is directly directed towards outside.
Figure 3-12
①
②
3.4.6
Restrictors
Note
The exhaust air valve is always open in the de-energized state.
● Reduce the air output to achieve actuating times of T > 1.5 s for small actuators. Use
● When turned clockwise, they reduce the air output and finally shut it off.
● In order to set the restrictors, we recommend closing them and then opening slowly.
● In case of double-acting valves, ensure that both restrictors have approximately the same
SIPART PS2 with PROFIBUS communication
Operating Instructions, 09/2007, A5E00127926-07
dry instrument air.
Purge air switch on the pneumatic block; view of the positioner on the pneumatic
connection side when the cover is open
Purge air switch
Pneumatic terminal strip
restrictors Y1 ① and Y2 ② for this purpose.
setting.
Description
3.4 Device components
29
Advertisement
Table of Contents
