Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/trouble_wui_access.html
User Guide
Home
Installation
Configuration
Tutorials
Help
I cannot access the configuration pages.
1. In your Web browser, make sure that you are entering the correct IP address for
the access point. To find the IP address, see
Pages.
2.
Configure your Web browser
3. If you are trying to access the configuration pages wirelessly, try to access them
with a wired connection as follows:
A. Using a computer connected by Ethernet cable to the same networking
device as the access point, start a Web browser.
B. Enter the IP address of the access point and press ENTER.
If you can access the configuration pages with a wired connection, you are
exeriencing a connectivity issue. See
troubleshooting procedure.
If you cannot access the configuration pages with a wired connection,
restore the factory default settings of the access point to reactivate it.
file:///G|/CSO/Documentation/Documentation%20-%20Dra...-1%20AP/User%20Guide/English/trouble_wui_access.html (1 of 2)10/26/2006 9:47:14 AM
Wireless Nd1 Access Point:
so that the HTTP Proxy feature of your Web browser.
Logging in to the Configuration
"For wireless connections"
in the basic
Advertisement
Table of Contents
