Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/config.html
You may need to disable the HTTP Proxy feature of your Web browser so the
configuration pages will display the most current information.
Internet Explorer users:
1. Click Tools > Internet Options, and select the Connections tab.
2. Select Never dial a connection, then click Apply.
3. Click OK.
4. Click Tools > Internet Options, and select the Connections tab again.
5. Click the LAN Settings button.
6. Clear all the check boxes and click OK.
7. Click OK again.
Netscape Navigator 8.x users:
1. Click Tools > Options > General.
2. Click the Connection Settings button.
3. Select Direct connection to the Internet, then click OK.
Logging in to the Configuration Pages
If you know the IP address of the access point, simply type it in your Web browser's
location or address line and press ENTER. If you do not know the IP address of the
access point, follow one of the procedures below to find it:
file:///G|/CSO/Documentation/Documentation%20-%20Dr...5454%20Mach-1%20AP/User%20Guide/English/config.html (2 of 5)10/26/2006 9:47:05 AM
Advertisement
Table of Contents
