file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/troubleshooting.html
Refer to your wireless adapter's documentation to determine how to
change these settings.
If you still have trouble using the access point, follow the procedure below that best
describes your symptom.
Installation and Configuration
The access point is connected to a live power source, but the power LED is off.
The installation procedure did not start when I inserted the USRobotics Installation CD-
ROM.
The Network Device Locator does not find the Wireless Nd
SecureEasySetup did not configure my wireless client.
I cannot access the configuration pages.
After I performed a firmware upgrade, the access point did not display its status page.
file:///G|/CSO/Documentation/Documentation%20-%20Dra...ach-1%20AP/User%20Guide/English/troubleshooting.html (2 of 4)10/26/2006 9:47:12 AM
Network name or SSID
Security type and key, psk, or passphrase.
Access Point.
1