file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/tut_client.html
Home
Installation
Configuration
Tutorials
Help
Configuring the Access Point as a Client
For Bridge mode, you must be using a wireless router or access point that supports WDS (Wireless
Distribution System). If you select Infrastructure mode, you will be able to select either WPA2 PSK
(AES), WPA2 PSK (TKIP), WPA PSK (AES), WPA PSK (TKIP), WEP Open, or WEP Shared for the
encryption method.
1. If you have not installed your access point, complete the
2. Type the IP address of your access point in your Web browser's location or address line and
press ENTER.
3. When prompted, enter your login and password for the access point and press ENTER.
4. Click the Wireless tab.
5. For the Wireless Network Type, select Infrastructure.
6. Next you will need to select the Network Name (SSID) of the wireless network device to
file:///G|/CSO/Documentation/Documentation%20-%20Dra...4%20Mach-1%20AP/User%20Guide/English/tut_client.html (1 of 3)10/26/2006 9:47:11 AM
Wireless Nd1 Access Point: User Guide
installation
procedure.