Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/tut_repeater.html
add one more Bridge in this fashion. If you add more than one Bridge in a chain, you will begin
to lose network quality and speed.
Note: If the WDS channel of the networking device that the access point is
connected to changes, the
information for the access point. Although the Network list on the
page will display the selected network and the correct channel, the change has
not yet been applied to the access point. To update the channel information on
the access point, click Save at the bottom of the
10. Select or enter any required
wireless network device.
11. Click Save at the bottom of the page.
© 2005-2006 U.S. Robotics Corporation
file:///G|/CSO/Documentation/Documentation%20-%20Dra...20Mach-1%20AP/User%20Guide/English/tut_repeater.html (3 of 3)10/26/2006 9:47:11 AM
Status
page will continue to show the old channel
Transmission
settings that you will need to connect to the
Wireless
Wireless
page.
Advertisement
Table of Contents
