US Robotics USR5454 User Manual page 63

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/tut_repeater.html
Home
Installation
Configuration
Tutorials
Help
Configuring the Access Point as a Range Extender
You must be using a wireless router or access point that supports WDS (Wireless Distribution
System). If you are using WPA as an encryption method in your wireless network, you must be using
either TKIP or AES, not a combination, since the Range Extender only supports one or the other.
1. If you have not installed your access point, complete the
2. Type the IP address of your access point in your Web browser's location or address line and
press ENTER.
3. When prompted, enter your login and password for the access point and press ENTER.
4. Click the Wireless tab.
5. For the Wireless Network Type, select Range Extender.
6. Select your Broadcast Network Name
required settings.
file:///G|/CSO/Documentation/Documentation%20-%20Dra...20Mach-1%20AP/User%20Guide/English/tut_repeater.html (1 of 3)10/26/2006 9:47:11 AM
Wireless Nd1 Access Point: User Guide
and
installation
Access Point Isolation
procedure.
options and enter any