US Robotics USR5454 User Manual page 66

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/tut_bridge.html
Home
Installation
Configuration
Tutorials
Help
Configuring the Access Point as a Bridge
For access point in Bridge mode, you must be using a wireless router or access point that supports
WDS (Wireless Distribution System). If you select Bridge mode, you will be able to select either WPA
PSK (AES), WPA PSK (TKIP), WEP Open, or WEP Shared for the encryption method.
Note: When you select a wireless router or access point to which you want to connect, make
sure you choose one that supports WDS.
1. If you have not installed your access point, complete the
2. Type the IP address of your access point in your Web browser's location or address line and
press ENTER.
3. When prompted, enter your login and password for the access point and press ENTER.
4. Click the Wireless tab.
5. For the Wireless Network Type, select Bridge.
file:///G|/CSO/Documentation/Documentation%20-%20Dr...%20Mach-1%20AP/User%20Guide/English/tut_bridge.html (1 of 4)10/26/2006 9:47:12 AM
Wireless Nd1 Access Point: User Guide
installation procedure.