Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/install.html
Find the IP Address of the Access Point
The networking device to which you connected the access point assigns IP addresses on your local network. To find the
IP address of the access point:
1. Access the configuration program or configuration pages of the networking device. For detailed instructions, consult
the documentation for the networking device.
2. Find the list of clients associated with the networking device.
3. On the client list, find the LAN MAC address of the access point.
4. Note the IP address associated with the LAN MAC address of the access point.
Run the Setup Wizard
1. Start your Web browser.
2. In the location or address line, type the IP address of the access point and press ENTER.
The wizard displays its welcome page:
Step Three: Configure Basic Settings
In the setup wizard, follow the on-screen instructions to complete the initial setup of the access point as follows:
Note: If you see a "Page Not Found" error at any time while using the setup wizard, press the Back button in
your Web browser or refresh the page.
file:///G|/CSO/Documentation/Documentation%20-%20Dra...5454%20Mach-1%20AP/User%20Guide/English/install.html (5 of 9)10/26/2006 9:47:05 AM
Advertisement
Table of Contents
