Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/tut_bridge.html
6. Next you will need to select the Network Name (SSID) of the wireless network device to
which you will be connecting the Bridge. If you do not see the Network Name (SSID) of the
appropriate wireless network device, click Scan to search the area again.
For Bridge mode, the list of networks is based on this access point's wireless radio scan. The
channel information may be different on the peer WDS device.
If the appropriate network device does not appear or if that device is not broadcasting its
Network Name (SSID), manually enter the information for the network device. You will need
to enter the Network Name, the Wireless MAC Address, and select the Channel of the
existing wireless network.
7. Next, you will need to select the security Method and enter the Pass phrase or the Key
(depending on if you selected WPA PSK or WEP). These settings must match the security
information of the wireless network device to which you are connecting the access point. Bridge
mode only supports WPA2 in Infrastructure mode.
file:///G|/CSO/Documentation/Documentation%20-%20Dr...%20Mach-1%20AP/User%20Guide/English/tut_bridge.html (2 of 4)10/26/2006 9:47:12 AM
Advertisement
Table of Contents
