Table of Contents
Advertisement
Wireless Nd1 Router User Guide
Multicast rate: Specify the rate at which multicast packets are transmitted and
received on your wireless network. Multicast packets are used to send a single
message to a set of recipients in a defined group. Teleconferencing, videoconferencing
and group email are some examples of multicast applications. Specifying a high
multicast rate may improve performance of multicast features. The rates are in Mbps.
You can select Automatic, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54.
Power level: Select either 100%, 50%, or 25% from the drop-down menu. The
Power level sets the strength of the wireless signal that the access point transmits.
You would want a lower setting if you live in an area where your wireless signal could
be overlapping with other wireless networks and want to reduce the interference you
encounter.
Control channel: Sets the channel on which the access point operates. If you are
experiencing interference or wireless network problems, changing the channel may
solve the issue. It is recommended that you keep the control channel set at
"Automatic" to avoid interference with adjacent networks.
file:///G|/CSO/Documentation/Documentation%20-%20D...4%20Mach-1%20AP/User%20Guide/English/wireless.html (14 of 17)10/26/2006 9:47:10 AM
Advertisement
Table of Contents
