Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/client_connect.html
1. Ensure that the wireless adapter to be connected to the network is set to infrastructure mode. For instruction in
changing your adapter's wireless mode, see your wireless adapter's documentation.
2. Set the network name or SSID in the wireless adapter's settings to the Network name that is used on the access
point. You can find the network name for the access point on the
3. Ensure that the wireless security settings for the wireless adapter match those that you set on the access point.
You can find the wireless security settings for the access point on the
adapter's wireless security settings, see your wireless adapter's documentation.
*
BROADCOM, SecureEasySetup, and the SecureEasySetup logo are trademarks or registered trademarks of Broadcom
Corporation in the United States and/or other countries.
© 2005-2006 U.S. Robotics Corporation
file:///G|/CSO/Documentation/Documentation%20-%20Dra...Mach-1%20AP/User%20Guide/English/client_connect.html (2 of 2)10/26/2006 9:47:07 AM
Status
page.
Status
page. For instruction in changing your
Advertisement
Table of Contents
