Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/trouble_client_scan.html
User Guide
Home
Installation
Configuration
Tutorials
Help
The Wireless Nd1 Access Point does not appear when I scan
for it with a wireless client.
Solution:
The access point may not be broadcasting its network name.
1. Using a computer connected to the same networking device as the access point,
start a Web browser.
2. Type the IP address of the access point, and press ENTER to display the
configuration pages of the access point. You can get the IP address from the
Network Device Locator.
3. Click the Wireless tab and verify that Broadcast network name is selected. If it is
not selected, select it, scroll to the bottom of the Wireless page, and click Save.
Solution:
file:///G|/CSO/Documentation/Documentation%20-%20Draf...-1%20AP/User%20Guide/English/trouble_client_scan.html (1 of 2)10/26/2006 9:47:13 AM
Wireless Nd1 Access Point:
Advertisement
Table of Contents
