Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/install.html
A. Connect the supplied power adapter to the 15VDC port on the access point.
B. Plug the power adapter into a standard power outlet.
Note:
This product is intended to be supplied by a Listed Direct Plug-in Power Unit marked Class 2 and
rated 15VDC, 1200 mA.
Step Two: Start the Setup Wizard
The setup wizard makes it easy for you perform basic setup of the access point. To start the wizard using an operating
system other than Windows, go to
Setup Wizard for Windows Users
If you are using a Windows operating system, you can use the setup program on the USRobotics Installation CD-ROM to
install and run the Network Device Locator and configure basic settings in one easy, continuous process:
1. Insert the USRobotics Installation CD-ROM into the CD-ROM or DVD drive.
If the CD doesn't start automatically, start it manually as follows:
A. Windows XP: Click Windows Start > My Computer.
Windows 2000: On the desktop, double-click My Computer.
B. Double-click the CD drive.
file:///G|/CSO/Documentation/Documentation%20-%20Dra...5454%20Mach-1%20AP/User%20Guide/English/install.html (2 of 9)10/26/2006 9:47:05 AM
Setup Wizard for Non-Windows
Users.
Advertisement
Table of Contents
