Table of Contents
Advertisement
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/install.html
3. Enter a User name and Password and click Finish.
Note: Remember the user name and password that you enter. You will need it whenever you access the
configuration pages of the access point.
The access point displays its status page. If you intend to connect wireless devices to the access point manually, you will
need the informaton on the status page. Consider bookmarking the page for easy access to the required information.
You have successfully completed the installation procedure. You can verify your network connection by registering your
Wireless Nd
Access Point at www.usr.com/productreg/.
1
To connect a client to the access point, see
Backing Up Your Configuration Settings
Having a backup reduces the effort required in reapplying your configuration settings should you ever restore your access
point to its factory default settings. USRobotics recommends that you back up your settings now.
1. In the configuration pages, click the Device tab, and scroll down to Back Up Settings.
2. Click Back Up.
file:///G|/CSO/Documentation/Documentation%20-%20Dra...5454%20Mach-1%20AP/User%20Guide/English/install.html (8 of 9)10/26/2006 9:47:05 AM
Connecting a Wireless Client
in this user guide.
Advertisement
Table of Contents
