Planmeca Promax 3D s User Manual page 45

Target
User's Manual (2D)
Select the tooth number (0-8) or temporomandibular joint
(TMJ) by touching the Target field. The number 0
indicates the space between the central incisors. The list
is cyclical.
NOTE The target selection can also be made by simply
touching the jaw icon on the corresponding location.
NOTE The tooth numbering system can be changed on
display i272. See section "Default program settings
(i270)" on page 49 for details.
When you have set the target position, confirm the
selections by touching the OK field. The main display
appears.
NOTE The position of the target area is based on average jaw
measurements. The position must be adjusted after
the patient has been positioned in the unit, see section
15.2 "Adjusting position of target area" on page 88.
Planmeca ProMax & Planmeca ProMax 3D s / 3D 41
CONTROL PANEL