Planmeca Promax 3D s User Manual page 53

Default program settings (i270)
User's Manual (2D)
On this display you can change default settings for TMJ
exposures and specify the tooth numbering system used
for tomographic exposures. You can also define presets
for 2D views in 3D imaging.
• TMJ (i27.1)
Touch the TMJ field to change the TMJ default
angle. Adjust the angle (lat or PA) with the left and
right arrows.
NOTE: Angle adjustment is available on SCARA 3
units only.
In double TMJ exposures the target position can be
automatically moved forwards for the second
exposure (open view projection). Use the bottom
arrows to select the movement step (e.g. 10
millimetres).
NOTE: This setting is available on SCARA 2 and
SCARA 3 units. On SCARA 2 units it applies to
lateral view only (not PA).
Confirm your selection by touching Done and
restart the X-ray unit to save the new default
settings for TMJ exposures.
• Tomo (i27.2)
Select the tooth numbering system you wish to use
on the Tomo / Select target area display.
The available options are:
- Planmeca: 0 - 9 (left / right)
- ADA: TMJ-Right, 1 - 8, 32 - 25, 0, 9 - 16, 17 - 24,
TMJ-Left
- ISO-FDI: TMJ-Right, 18 - 11, 48 - 41, 0, 21 - 28,
31 - 38, TMJ-Left
The selected option will be marked with a dot.
Touch Done to confirm your selection.
Planmeca ProMax & Planmeca ProMax 3D s / 3D 49
INFORMATION DISPLAYS