8.4
Selecting temporomandibular joint (TMJ) program
Planmeca ProMax with Dimax sensor:
User's Manual (2D)
To select a temporomandibular joint (TMJ) program,
touch the Prog. field on the main display. The main
display is the display that is shown when the X-ray unit is
switched on.
Planmeca ProMax 3D s / 3D + SmartPan:
The Select program type display appears. Select program
type TMJ.
NOTE The Select program type display will show all the
exposure programs that the X-ray unit features at the
moment. The X-ray unit can be upgraded with new
exposure programs, contact your dealer for further
information.
On the next display, select the TMJ program you wish to
use. If the program is not shown on the display, you can
use the down arrow to scroll through the list.
Refer to section 7.2 "Temporomandibular joint (TMJ)
programs" on page 17 for a more detailed description of
the program types.
When you have selected the program the main display
will be shown again.
Planmeca ProMax & Planmeca ProMax 3D s / 3D 35
CONTROL PANEL