Error Messages - Planmeca Promax 3D s User Manual

ERROR MESSAGES

Code
H196
20 ERROR MESSAGES
98 Planmeca ProMax & Planmeca ProMax 3D s / 3D
Explanation
Remove all 3D / panoramic patient
supports before taking cephalometric
images.
NOTE Contact your service technician for help if you receive
an error message.
The X-ray unit incorporates a self-checking feature that
monitors the operation of the unit. If the system detects a
technical fault an error message (e.g. E201) will appear
on the control panel.
An error message indicates that the X-ray unit has a
problem that needs to be solved before further exposures
can be taken. The X-ray unit will not accept any
commands from the user until the error message is
cleared from the display. Guide the patient away from the
X-ray unit. Then clear the message by touching OK.
Comments
User's Manual (2D)