Planmeca Promax 3D s User Manual page 52

INFORMATION DISPLAYS
Select language (i260)
48 Planmeca ProMax & Planmeca ProMax 3D s / 3D
• 3D display settings (i25.6)
Select the option Enable CTDI Display for 3D
program to set the X-ray unit so that the estimated
milligray (mGy) value will be shown at the top of the
display for the exposure you are going to take.
The selected option(s) will be marked with a green check
mark. To deselect a function, touch the field again. The
green check mark will disappear.
Confirm your selection(s) by touching Done. Touching the
Cancel field will bring you back to the Visual adjustments
(i250) display.
To change the language of the control panel displays, first
select the option Select language (i260) on the User
preference settings (i200) display. The Select language
(i260) display will appear.
You can use the arrows at the bottom of the display to
scroll up and down the list. Select the language of your
choice. The selected language will be marked with a blue
dot.
Confirm your selection by touching Done. Touching the
Cancel field will bring you back to the User preference
settings (i200) display.
User's Manual (2D)