HPE Moonshot 45Gc Security Configuration Manual page 49

Step
3. Specify HWTACACS
accounting servers.
Specifying the shared keys for secure HWTACACS communication
The HWTACACS client and server use the MD5 algorithm and shared keys to generate the
Authenticator value for packet authentication and user password encryption. The client and server
must use the same key for each type of communication.
Perform this task to configure shared keys for servers in an HWTACACS scheme. The keys take
effect on all servers for which a shared key is not individually configured.
To specify a shared key for secure HWTACACS communication:
Step
1. Enter system view.
2. Enter HWTACACS scheme
view.
3. Specify a shared key for
secure HWTACACS
authentication, authorization,
or accounting
communication.
Specifying an MPLS L3VPN instance for the scheme
The VPN instance specified for an HWTACACS scheme applies to all servers in that scheme. If a
VPN instance is also configured for an individual HWTACACS server, the VPN instance specified for
the HWTACACS scheme does not take effect on that server.
To specify a VPN instance for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS scheme
view.
3. Specify a VPN instance for
the HWTACACS scheme.
Command
hwtacacs-scheme-name
•
Specify the primary HWTACACS
accounting server:
primary accounting { host-name
| ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
accounting server:
secondary accounting
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
key { accounting |
authentication | authorization }
{ cipher | simple } string
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
vpn-instance vpn-instance-name
36
Remarks
By default, no accounting server
is specified.
Two HWTACACS accounting
servers in a scheme, primary or
secondary, cannot have the same
combination of hostname, IP
address, port number, and VPN
instance.
Remarks
N/A
N/A
By default, no shared key is
specified.
The shared key configured on the
device must be the same as the
shared key configured on the
HWTACACS server.
Remarks
N/A
N/A
By default, an HWTACACS
scheme belongs to the public