Displaying And Maintaining 802.1X; 802.1X Authentication Configuration Examples; Basic 802.1X Authentication Configuration Example - HPE Moonshot 45Gc Security Configuration Manual

Displaying and maintaining 802.1X

Execute display commands in any view and reset commands in user view.
Task
Display 802.1X session information,
statistics, or configuration information of
specified or all ports.
Display online 802.1X user information.
Clear 802.1X statistics.
Remove users from the 802.1X guest VLAN
on a port.

802.1X authentication configuration examples

Basic 802.1X authentication configuration example

Network requirements
As shown in
port FortyGigE 1/1/1. Implement MAC-based access control on the port, so the logoff of one user
does not affect other online 802.1X users.
Use RADIUS servers to perform authentication, authorization, and accounting for the 802.1X users.
If RADIUS authentication fails, perform local authentication on the access device.
Configure the host at 10.1.1.1/24 as the primary authentication and accounting servers, and the host
at 10.1.1.2/24 as the secondary authentication and accounting servers. Assign all users to the ISP
domain bbb.
Configure the shared key as name for packets between the access device and the authentication
server. Configure the shared key as money for packets between the access device and the
accounting server.
Figure 31 Network diagram
Figure 31, the access device performs 802.1X authentication for users that connect to
Command
display dot1x [ sessions | statistics ] [ interface
interface-type interface-number ]
display dot1x connection [ interface interface-type
interface-number | slot slot-number | user-mac mac-addr |
user-name name-string ]
reset dot1x statistics [ interface interface-type
interface-number ]
reset dot1x guest-vlan interface interface-type
interface-number [ mac-address mac-address ]
93