Table of Contents
Advertisement
e. Select Connection > SSH > Auth from the navigation tree.
The window shown in
f. Click Browse... to bring up the file selection window, navigate to the private key file
(private.ppk in this example), and click OK.
Figure 103 Specifying the private key file
g. Click Open to connect to the server.
If the connection is successfully established, the system notifies you to enter the username.
After entering the username (client002), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in
•
You can log in to Switch B through the Stelnet client that runs on Switch A.
•
After login, you are assigned the user role network-admin for configuration management.
•
Switch B acts as the Stelnet server and uses password authentication.
•
The username and password of the client are saved on Switch B.
Figure 104 Network diagram
Figure 103
Figure
104:
appears.
354
Advertisement
Table of Contents
Troubleshooting
