HPE Moonshot 45Gc Security Configuration Manual page 212

Primary Auth Server:
IP : 192.168.1.2
VPN : Not configured
Primary Acct Server:
IP : 192.168.1.3
VPN : Not configured
Second Auth Server:
IP : 192.168.1.3
VPN : Not configured
Second Acct Server:
IP : 192.168.1.2
VPN : Not configured
Accounting-On function
retransmission times
retransmission interval(seconds)
Timeout Interval(seconds)
Retransmission Times
Retransmission Times for Accounting Update : 5
Server Quiet Period(minutes)
Realtime Accounting Interval(minutes)
NAS IP Address
VPN
User Name Format
Data flow unit
Packet unit
Attribute-15 check-mode
# After users pass authentication, display port security configuration. Verify that port FortyGigE 1/1/1
allows only one 802.1X user to be authenticated.
[Device] display port-security interface fortygige 1/1/1
Port security parameters:
Port security
AutoLearn aging time
Disableport timeout
MAC move
Authorization fail
NAS-ID profile is not configured
OUI value list
Index : 1
Index : 2
Index : 3,
Index : 4,
Index : 5,
FortyGigE1/1/1 is link-up
Port mode
NeedToKnow mode
Intrusion protection mode
: Enabled
: 0 min
: 20 s
: Denied
: Online
:
Value : 123401
Value : 123402
Value : 123403
Value : 123404
Value : 123405
: userLoginWithOUI
: Disabled
: NoAction
199
Port: 1812
Port: 1813
Port: 1812
Port: 1813
: Disabled
: 50
: 3
: 5
: 5
: 5
: 15
: Not configured
: Not configured
: without-domain
: Byte
: one
: strict
State: Active
State: Active
State: Active
State: Active