Configuring A Mac Authentication Guest Vlan; Configuring A Mac Authentication Critical Vlan - HPE Moonshot 45Gc Security Configuration Manual

Configuring a MAC authentication guest VLAN

You must configure the MAC authentication guest VLAN on a hybrid port. Before you configure the
MAC authentication guest VLAN on a hybrid port, complete the following tasks:
•
Enable MAC authentication globally and on the port.
•
Enable MAC-based VLAN on the port.
•
Create the VLAN to be specified as the MAC authentication guest VLAN.
•
Configure the VLAN as an untagged member on the port.
When you configure the MAC authentication guest VLAN on a port, follow the guidelines in
Table 12 Relationships of the MAC authentication guest VLAN with other security features
Feature
Quiet feature of MAC
authentication
Super VLAN
Port intrusion protection
To configure the MAC authentication guest VLAN on a port:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view.
3. Specify the MAC
authentication guest
VLAN on the port.
4. (Optional.) Set the
authentication interval
for users in the MAC
authentication guest
VLAN.

Configuring a MAC authentication critical VLAN

You must configure the MAC authentication critical VLAN on a hybrid port. Before you configure the
MAC authentication critical VLAN on a hybrid port, complete the following tasks:
•
Enable MAC authentication globally and on the port.
•
Enable MAC-based VLAN on the port.
•
Create the VLAN to be specified as the MAC authentication critical VLAN.
Relationship description
The MAC authentication guest VLAN feature
has higher priority.
When a user fails MAC authentication, the
user can access the resources in the guest
VLAN. The user's MAC address is not
marked as a silent MAC address.
You cannot specify a VLAN as both a super
VLAN and a MAC authentication guest VLAN.
The guest VLAN feature has higher priority
than the block MAC action but lower priority
than the shutdown port action of the port
intrusion protection feature.
Command
system-view
interface interface-type
interface-number
mac-authentication
guest-vlan guest-vlan-id
mac-authentication
guest-vlan auth-period
period-value
112
Reference
See "Setting MAC
authentication
See Layer 2—LAN Switching
Configuration Guide.
See "Configuring port
security."
Remarks
N/A
N/A
By default, no MAC authentication guest
VLAN is configured.
You can configure only one MAC
authentication guest VLAN on a port.
The default setting is 30 seconds.
Table 12.
timers."