Failed To Set The Storage Path - HPE Moonshot 45Gc Security Configuration Manual

6. If the problem persists, contact Hewlett Packard Enterprise Support.

Failed to set the storage path

Symptom
The storage path for certificates or CRLs cannot be set.
Analysis
•
The specified storage path does not exist.
•
The specified storage path is illegal.
•
The storage space of the device is full.
Solution
1. Use mkdir to create the path.
2. Specify a valid storage path for certificates or CRLs.
3. Clear up the storage space of the device.
4. If the problem persists, contact Hewlett Packard Enterprise Support.
257