Configuring Hwtacacs Schemes - HPE Moonshot 45Gc Security Configuration Manual

To enable SNMP notifications for RADIUS:
Step
1. Enter system view.
2. Enable SNMP notifications
for RADIUS.
Displaying and maintaining RADIUS
Execute display commands in any view and reset commands in user view.
Task
Display the RADIUS scheme
configuration.
Display RADIUS packet statistics.
Clear RADIUS statistics.

Configuring HWTACACS schemes

Configuration task list
Tasks at a glance
(Required.)
(Required.)
(Optional.) Specifying the HWTACACS authorization servers
(Optional.) Specifying the HWTACACS accounting servers
(Required.)
(Optional.) Specifying an MPLS L3VPN instance for the scheme
(Optional.) Setting the username format and traffic statistics units
(Optional.) Specifying the source IP address for outgoing HWTACACS packets
(Optional.) Setting HWTACACS timers
(Optional.) Displaying and maintaining HWTACACS
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure a maximum of 16 HWTACACS schemes. An HWTACACS scheme can be used by multiple
ISP domains.
To create an HWTACACS scheme:
Step
1. Enter system view.
2. Create an HWTACACS
Creating an HWTACACS scheme
Specifying the HWTACACS authentication servers
Specifying the shared keys for secure HWTACACS communication
Command
system-view
snmp-agent trap enable radius
[ accounting-server-down |
authentication-error-threshold |
authentication-server-down |
accounting-server-up |
authentication-server-up ] *
Command
display radius scheme [ radius-scheme-name ]
display radius statistics
reset radius statistics
Command
system-view
hwtacacs scheme
33
Remarks
N/A
By default, all types of SNMP
notifications are enabled for
RADIUS.
Remarks
N/A
By default, no HWTACACS