Applying Nas-Id Profile To Port Security; Enabling The Authorization-Fail-Offline Feature - HPE Moonshot 45Gc Security Configuration Manual

Step
1. Enter system view.
2. Enable MAC move.

Applying NAS-ID profile to port security

By default, the device sends its device name in the NAS-Identifier attribute of any RADIUS requests.
A NAS-ID profile enables you to send different NAS-Identifier attribute strings in RADIUS requests
from different VLANs. The strings can be organization names, service names, or any user
categorization criteria, depending on the administrative requirements.
For example, map the NAS-ID companyA to all VLANs of company A. The device will send
companyA in the NAS-Identifier attribute for the RADIUS server to identify requests from any
Company A users.
You can apply a NAS-ID profile to port security globally or on a port. On a port, the device selects a
NAS-ID profile in the following order:
1. The port-specific NAS-ID profile.
2. The NAS-ID profile applied globally.
If no NAS-ID profile is applied or no matching binding is found in the selected profile, the device uses
the device name as the NAS-ID.
For more information about the NAS-ID profile configuration, see "Configuring AAA."
To apply a NAS-ID profile to port security:
Step
1. Enter system view.
2. Apply a NAS-ID profile.

Enabling the authorization-fail-offline feature

The authorization-fail-offline feature logs off port security users who fail ACL or user profile
authorization.
A user fails ACL or user profile authorization in the following situations:
•
The device fails to authorize the specified ACL or user profile to the user.
•
The server assigns a nonexistent ACL or user profile to the user.
This feature does not apply to VLAN authorization failure. The device logs off these users directly.
To enable the authorization-fail-offline feature:
Command
system-view
port-security mac-move permit
Command
system-view
•
In system view:
port-security nas-id-profile
profile-name
•
In Layer 2 Ethernet interface
view:
a. interface interface-type
interface-number
b. port-security
nas-id-profile
profile-name
194
Remarks
N/A
By default, MAC move is
disabled.
Remarks
N/A
By default, no NAS-ID profile is
applied in system view or in Layer
2 Ethernet interface view.