HPE Moonshot 45Gc Security Configuration Manual page 39

Step
2. Enter RADIUS scheme view.
3. Specify a shared key for
secure RADIUS
communication.
Specifying an MPLS L3VPN instance for the scheme
The VPN instance specified for a RADIUS scheme applies to all authentication and accounting
servers in that scheme. If a VPN instance is also configured for an individual RADIUS server, the
VPN instance specified for the RADIUS scheme does not take effect on that server.
To specify a VPN instance for a scheme:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
3. Specify a VPN instance for the
RADIUS scheme.
Setting the username format and traffic statistics units
A username is in the userid@isp-name format, where the isp-name argument represents the user's
ISP domain name. By default, the ISP domain name is included in a username. However, older
RADIUS servers might not recognize usernames that contain the ISP domain names. In this case,
you can configure the device to remove the domain name of each username to be sent.
If two or more ISP domains use the same RADIUS scheme, configure the RADIUS scheme to keep
the ISP domain name in usernames for domain identification.
The device reports online user traffic statistics in accounting packets. The traffic measurement units
are configurable, but they must be the same as the traffic measurement units configured on the
RADIUS accounting servers.
To set the username format and the traffic statistics units for a RADIUS scheme:
Step
1. Enter system view.
2. Enter RADIUS scheme
view.
3. Set the format for
usernames sent to the
RADIUS servers.
Command
radius scheme
radius-scheme-name
key { accounting |
authentication } { cipher |
simple } string
Command
system-view
radius scheme
radius-scheme-name
vpn-instance vpn-instance-name
Command
system-view
radius scheme
radius-scheme-name
user-name-format
{ keep-original | with-domain
| without-domain }
26
Remarks
N/A
By default, no shared key is
specified.
The shared key configured on the
device must be the same as the
shared key configured on the
RADIUS server.
Remarks
N/A
N/A
By default, a RADIUS
scheme belongs to the public
network.
Remarks
N/A
N/A
The default setting depends on the type of
the startup configuration:
•
If the device starts up with initial
settings, the ISP domain name is
included in a username.
•
If the device starts up with the factory
defaults, the ISP domain name is
included in a username except for
the predefined RADIUS scheme
named system. When the username
is sent to a RADIUS server in the