Triggering Self-Tests; Displaying And Maintaining Fips; Fips Configuration Examples; Entering Fips Mode Through Automatic Reboot - HPE Moonshot 45Gc Security Configuration Manual

•
Continuous random number generator test—This test is run when a random number is
generated. If two consecutive random numbers are different, the test succeeds. Otherwise, the
test fails. This test can also be run when a DSA/RSA asymmetrical key-pair is generated.

Triggering self-tests

To examine whether the cryptography modules operate correctly, you can trigger a self-test on the
cryptographic algorithms. The triggered self-test is the same as the power-up self-test. If the self-test
fails, the device where the self-test process exists reboots.
To trigger a self-test:
Step
1. Enter system view.
2. Trigger a self-test.

Displaying and maintaining FIPS

Execute display commands in any view.
Task
Display the FIPS mode state.

FIPS configuration examples

Entering FIPS mode through automatic reboot

Network requirements
Use the automatic reboot method to enter FIPS mode, and use a console port to log in to the device
in FIPS mode.
Configuration procedure
# If you want to save the current configuration, execute the save command before you enable FIPS
mode.
# Enable FIPS mode and choose the automatic reboot method to enter FIPS mode. Set the
username to root and the password to 12345zxcvb!@#$%ZXCVB.
<Sysname> system-view
[Sysname] fips mode enable
FIPS mode change requires a device reboot. Continue? [Y/N]:y
Reboot the device automatically? [Y/N]:y
The system will create a new startup configuration file for FIPS mode. After you set the
login username and password for FIPS mode, the device will reboot automatically.
Enter username(1-55 characters):root
Enter password(15-63 characters):
Confirm password:
Waiting for reboot... After reboot, the device will enter FIPS mode.
Command
system-view
fips self-test
Command
display fips status
441