Using The Config Menu - Kramer VS-3232DN User Manual

3. Using the numeric keys, enter the preset (in this example, 02) to recall.
The following is displayed:
Wait .....
After a few seconds, the following is displayed on the right hand side:
CONFIRM
RECALL <= 02
The TAKE button flashes.
4. Press TAKE.
The preset is recalled. The display reverts to the output/input display.
7.2

Using the Config Menu

The Config Menu provides access to configuration settings that are not regularly
changed and comprises the following options:
• Input signal detection display
• Input port parameter setting
• Output load detection display (see
• Output port parameter setting
• Interface configuration (see
• Interface reply configuration
• Protocol switching
Storing the default setup
•
• Total matrix reset
• Display firmware versions
To enter the Config Menu:
• Press MENU twice. The MENU button lights and the following message is
displayed:
Start configuration menu
MENU to view setups ENT to change them
34
(Section
(Section
Section
(Section
Section 7.2.5)
(Section
(Section 7.2.7)
(Section 7.2.8)
(Section 7.2.9)
(Section 7.2.10)
VS-3232DN - Using the Configuration Menus
7.2.1)
7.2.2)
7.2.3)
7.2.4)
7.2.6)